Maxmech Petrol Water Pump 2inch 7HP 30meter

The Maxmech Petrol Water Pump with a 2-inch inlet/outlet, powered by a 7HP engine, and with a total head (or lift height) of around 30 meters, is a robust and highly useful machine for various water transfer applications in Kenya.

Here’s a comprehensive look at this type of pump:

Key Features and Specifications (Typical Maxmech 2-inch 7HP Petrol Water Pump):

• Engine: 7HP (Horsepower) 4-stroke, single-cylinder, air-cooled petrol engine. This provides ample power for efficient water transfer. (Note: Some listings might state 6.5HP or 7.5HP, which are very close in performance to 7HP).
• Inlet/Outlet Size: 2 inches (50mm). This is a common and versatile size, balancing flow rate with ease of handling and connection to standard hoses.
• Total Head (Lift Height): Approximately 28 meters to 30 meters. This refers to the maximum vertical distance the pump can push water upwards. This is a good range for general irrigation, draining, and water transfer in varied terrains.
• Suction Head/Lift: Typically around 7 meters to 8 meters. This is the maximum vertical distance the pump can draw water from (e.g., from a well, pond, or river).
• Flow Rate (Discharge Capacity): Expect a flow rate of approximately 30,000 liters per hour (L/hr), or 30 cubic meters per hour (m³/hr), or around 500 liters per minute (L/min). This indicates its capacity to move large volumes of water quickly.
• Fuel Type: Unleaded petrol (gasoline).
• Start System: Usually recoil start (pull cord).
• Construction: Durable steel frame and aluminum pump casing,