USK Surface Water Pump 1HP Stainless Head

When you mention a “USK Surface Water Pump 1HP Stainless Head,” you’re highlighting a key material component that significantly impacts the pump’s performance and durability. While USK offers various 1HP pumps (like the JET-100 we discussed), specifying “Stainless Head” means the pump’s front casing, which comes into direct contact with the water, is made of stainless steel rather than the more common cast iron.

This distinction is important because it offers several advantages.

Key Features and Specifications (with emphasis on Stainless Head):

• Power: 1.0 HP (0.75 KW). This provides strong pumping capability.
• Pump Type: While the “JET-100” is a common 1HP USK surface pump, a “Stainless Head” option could also exist for other designs like peripheral (QB-series with an upgraded head) or centrifugal pumps. However, for surface pumps, the JET series is often the one that benefits most from enhanced material on the head due to its self-priming nature and common use in slightly more demanding scenarios.
• Stainless Steel Head/Casing: This is the defining feature. Instead of cast iron, the pump’s wet end (the part that the water flows through) is constructed from stainless steel (often 304 or 316 grade).
  • Corrosion Resistance: This is the primary advantage. Stainless steel is highly resistant to rust and corrosion, especially important if the water contains minor impurities, is slightly acidic, or if the pump is exposed to humid environments.
  • Durability and Longevity: Stainless steel offers superior strength and wear resistance compared to cast iron, leading to a longer operational life. It’s less prone to cracking or deformation.
  • Hygiene and Cleanliness: Stainless steel is non-reactive and has a smooth surface, which reduces the adherence of impurities and the growth of bacteria. This makes it suitable for applications where water purity is a concern.
  • Temperature Resistance: Stainless steel maintains its strength and integrity across a wider temperature range.
• Self-Priming (if it’s a JET type): If it’s a 1HP JET pump with a stainless head (e.g., USK JET-100 with Stainless Head option), it will retain the self-priming capability, meaning it can draw water and prime itself without manual intervention.
• Flow Rate & Max Head: These specifications will be similar to a standard 1HP JET-100 or equivalent 1HP surface pump, typically:
  • Flow Rate: 50-60 L/min (up to 3,600 L/hr).
  • Max Head: 40-45 meters.
• Suction Head: Up to 8 or 9 meters.
• Inlet/Outlet Size: Usually 1 inch x 1 inch.
• Voltage: 220V-240V, 50Hz.